eile EPX 300
areas of usage
- In places which caution to be taken against corrosion
- To augment adherence of old concrete to new concrete
- To adhere materials such as concrete, steel and iron to each other
features of product
- It is easy to apply.
- It can be applied with a brush or roller
- It protects reinforcement from moisture and prevents corrosion
- It protects reinforcement against wear and corrosion
- It provides perfect adherence between two concretes
- It is solvent free
The surfaces should be clean and durable, material residues such as oil, grease, paint, rust and paraffin should be removed and loose parts should be cleaned with air or mechanical methods.
B component should be added to A component and it should be mixed with a low speed mixer for 3-4 minutes until a homogeneous mixture is obtained. After the first mixing, it should be taken to another clean container and mixed again. After this procedure, material is ready to use.
Karışım Oranı: A component/ B component: 3/1 ( by weight )
The homogeneous mixture is applied on surface with a brush or roller. When it’s used as adherence augmenter material, new concrete is poured on old concrete when eile EPX 300 is still wet.
- On very hot, windy and rainy weathers and if ambient temperature is under +10 °C or over +35°C, no application should be done.
- For the applications to be done on very cold weathers, the ambient and floor temperature should be increased with heaters.
- The application should be done by expert persons.
- In order to cure the material fully, the ambient and floor temperature should be within the recommended range.
Set: 4,5 kg, A component: 3,375 kg can, B component: 1,125 kg can
It should be stored in unopened original package in a cool and dry place and over +5°C and under +35°C away from direct sunlight.
