eile LEVEL
areas of usage
- Before final coat coating on floors exposed to medium and heavy pedestrian traffic,
- Before gluing ceramics, marble, parquet, carpets and PVC coatings indoors
- For the purpose of leveling damaged ground,
- It is used in healthcare institutions, shopping malls and hotels.
features of product
- Fast and easy to apply.
- Mixed with water.
- It spreads on its own, reaches the scale.
Surface preparation: Care should be taken to ensure that the surface is solid, load-bearing, dust-free and clean. Any oil, grease, rust and paraffin residues that may weaken adherence should be cleaned and there should be no loose parts. Defects on the surface must be repaired. Air flow should be prevented in the application area. In large areas, tiling should be done and application levels should be determined to prevent elevation differences. Priming: To extend the processing time of Eile LEVEL leveling screed and to ensure high adherence to the application surface; The surface should be primed with eile PRIMER E in order to minimize possible air bubbles. A second layer of primer should be applied on highly absorbent surfaces. At least two hours should be waited between coats of primer application. Eile level application can be started 24 hours after the primer application. eile ASTAR E should be applied without dilution.
An appropriate amount of water is poured into a clean mixing bucket. The material is slowly added to the mixing bucket and mixed with a low-speed mixer for approximately 3-4 minutes until a homogeneous mixture is obtained. After resting for approximately 4 minutes, it is mixed again for 30 seconds and made ready for use.
Karışım Oranı: For 25 kg Bag: 4.5-5.25 liters of water -- Mixture Density: 2 gr/ cm3
The prepared mortar spreads on its own. The thickness of the material is adjusted with a notched trowel. Water should not be added during the setting period, air on the surface should be removed with a hedgehog roller. Sudden temperature changes that may occur in the application environment should be prevented. Application should not be made in areas exposed to the effects of sun and wind.
- Eile LEVEL is suitable for application in +5 °C to +25 °C temperature conditions. If the ambient or application ground temperature is not within the appropriate temperature conditions, appropriate temperatures should be waited for the application. Application should not be made in extremely hot and windy environments.
- Since the applied ground and ambient temperature will affect the hydration reaction of the cement, the ambient and ground temperature must be within the allowed temperature range.
- After the material is applied, rapid drying should be prevented. The applied material should be protected from water contact.
- Applications should be done by expert practitioners.
- After the material is applied, at least three days should be waited for surface coating applications.
- Letting the mixture rest and mixing again before application should not be neglected.
25 kg kraft bag
It should be stored in its unopened original packaging in a cool and dry environment, stacked in maximum 10 layers.
