eile 125 KK
areas of usage
- In applications with heavy medium and heavy traffic, in shipyards
- Indoors and outdoors; warehouses, garages and parking areas
- It is applied to fresh concrete surfaces where mechanical abrasion resistance is required and dust-free, such as industrial building floors, repair shops and workshops.
features of product
- The applied surface is resistant to impact and abrasion.
- It has high permeability.
- It prevents the concrete from dusting.
- Easy to apply to load-bearing concrete.
- Available in three different color options.
- Contains corundum aggregate with special granulometric grain size.
After the areas are prepared, concrete is poured. Concrete is compacted with a vibrating screed. A final correction can be made with a wooden trowel. The carrier concrete of the area where POMEX 125 KK will be applied must be at least C25 or 350 dose class.
After the application of the material is completed, it is applied to the surface in order to ensure rapid evaporation of hydration water, prevention of shrinkage cracks and dust-freeness; Curing material eile Curing 105 or eile Curing AST products should be applied. Max. After 24 hours, expansion joints should be created by cutting at least 4 mm wide and 1/3 of the concrete thickness. Eile Polyurethane Sealant should be applied to the joints to prevent negative situations such as breakage and dust formation.
Karışım Oranı:
The concrete surface to be applied should not be too wet or too dry. If the concrete is too dry, the surface hardener will not combine with the concrete and will peel off from the ground. If the application is made while the concrete is too wet, the surface hardener will decompose and the required strength and durability will not be provided on the surface. To the application; It starts if there is a 0.5-1.5 cm deep footprint left on the concrete. Ground; The surface must be wet enough to absorb the moisture required by the hardener. Application area; POMEX 125 KK bags are placed around the mothers according to the pointsToTakeIntoConsideration amount. It is spread homogeneously onto the surface by hand or mechanical spreader. The sprinkled material is expected to absorb water from the concrete and change color. The material, which is sprinkled homogeneously and whose color changes by absorbing water, is compressed with the tray finish and its integration with the concrete is ensured. In applications over 5kg/m2, 2/3 of the material is sprinkled first. After the disc process is completed, the remaining 1/3 of the material is sprinkled. Polishing process is carried out again with a disk. After the rough finishing process; Final polishing should be done with fine blade adjustments until the desired shine is achieved. Water should not be sprinkled on the surface during application.
- Floor surface hardeners should be applied by expert applicators.
- Application should be done between +5° C - +35° C.
- It should not be applied on surfaces that are frozen, melting or in danger of freezing within 24 hours.
25 kg craft bag
It should be stored in its unopened original packaging in a cool and dry environment, stacked in maximum 10 layers.
