eile SYP 1000
areas of usage
- Coating materials such as ceramics, tiles, glass mosaic
- Indoors; on walls and floors,
- Used for outdoor flooring.
features of product
- Easy to prepare and apply.
- Processing time is long.
- It does not slip in vertical applications.
- It has high adhesion properties.
Care should be taken to ensure that the application surface is solid, dry, supporting, dust-free and clean, as well as level. The surface should be cleaned of residues that would reduce adherence and there should be no loose particles. Damaged surfaces should be repaired with eile TH 60 or eile TH 70 repair mortars two days in advance. If the application surface or ambient temperature is above +25°C; The application surface should be wetted and waited until there is no free water left on the surface.
The appropriate amount of water is poured into the clean mixing bowl with the help of a scale and the eile SYP 1000 bag is slowly added and mixed with a low speed mixer for 3 - 5 minutes to ensure a homogeneous appearance. After resting for 5 minutes, the material is mixed again for 20-30 seconds and becomes ready for use.
Karışım Oranı: For 25 kg of powder: 6-7.5 liters of water -- For 1 kg of powder product: 0.240-0.300 liters of water
A 1 mm thick layer of eile SYP 1000 is applied to the application surface with the flat side of the trowel, and eile SYP 1000 Adhesive Mortar is applied in one direction with the toothed side of the trowel to obtain the thickness. In adhesion of ceramics or tiles of different thicknesses, in order to cover the defects on the application surface, each ceramic or It is recommended to apply 1 mm thick mortar under the tiles. In order to ensure good adhesion, force should be applied to the ceramics or tiles with a rubber hammer to ensure that they fully contact the adhesive mortar. The application is completed by leaving the recommended joint gap according to the appropriate ceramic or tile size. POMEX brand joint filler products should be used to fill the left joint gaps.
- For application; if the ambient and surface temperature is below +5°C or above +35°C, appropriate temperatures must be waited. Application should not be made in extremely hot, rainy or windy weather.
- A proper moisture level is required to increase the performance of the adhesive mortar.
- The spread thickness of eile SYP 1000 should be minimum 3 mm and maximum 6 mm.
- Ceramics with high water absorption should be saturated with water before application.
- Water and new material should never be added to the mixture that has started to dry.
- On very porous surfaces, ceramic application should be started after priming the surface with eile ASTAR E product.
- The application should begin after impermeable and shiny surfaces have been primed with eile TU 05 or eile TU-06 product.
- The joint application can be started after at least 24 hours.
- In wet volume applications, joint gaps should be filled with Pomex Flex Joint Filler or Pomex Pool Joint Filler.
- Joint gaps wider than 6 mm should be filled with pomex rusik joint joint.
- Eile POMAX 28 product should be used for applications higher than 3 m on the interior and exterior of buildings.
25 kg craft bag
It should be stored in its unopened original packaging in a cool and dry environment, stacked in maximum 10 layers.
