POMEX FLEX JOINT
areas of usage
- It is used on outdoor floors, indoor walls and floors; Grout applications up to 6 mm of the ceramics, tiles, natural stones, marble, and granite ceramic and similar coating materials.
features of product
- It is ready for use with its color options.
- It is resistant to fading.
- It is resistant to abrasion.
- It does not crack or bleed.
- It is easy to apply; contains waterproof additives.
- It is resistant to water and frost.
- It has a long processing period.
Before the grout applications, the residues such as dust, sawdust, construction cement in the grout gap should be removed without damaging the ceramic. The grout gaps especially on walls should be moisturized. Before the application of grout sealant, the adhesive must complete curing.
A clean mixing bowl is filled with the necessary amount of water by means of a scale. POMEX FLEX JOINT is slowly added into the water. It is mixed with a low speed mixer for 3 - 5 minutes until obtaining a homogenous mixture. The mixture waits for 5-10 minutes in the mixing bowl and mixed again for 20-30 seconds to get it ready for use.
Karışım Oranı: 6.5-7.5 liters of water for 20 kg powder, 0.325-0.375 for 1 kg powder.
Joint filler mortar that is ready for application; It is spread on the surface and the joint gaps are filled thoroughly with cross movements. Excesses on the surface; It should be scraped off with the help of a moistened sponge or a soft-tipped spatula. When the POMEX FLEX FUGA surface filled into the joint gaps dries, the surface; It should be cleaned with circular movements using a damp sponge. For this process, the generally expected time is around 15-30 minutes. This period is shortened when a highly absorbent coating material is used or in applications in hot and windy environments. If the wiping process is done prematurely or with a very wet sponge, fluctuation problems in the POMEX FLEX FUGA color may occur. Attention should be paid to the cleanliness of the sponge used in the wiping process.
- If the ambient temperature is below +5°C or above +35°C, the suitable conditions should be met. Extremely hot, rainy or windy weather is not suitable for application.
- Grout holes to be filled with Pomex flex joint should not be larger than 6 mm. The ceramics with high water absorbency rate should be saturated with water before the application.
- The mortar starting to dry should not be mixed with water or new materials.
- Before the application of grout sealant, the adhesive must complete curing.
Kraft sack of 20 kg
Best stored in cool and dry place in their unopened package with a maximum 10-fold stacking.
