eile PUR 012
areas of usage
- Waterproofing of roofs, balconies and terraces, concrete walls.
- Waterproofing of wet areas (under ceramic tilesl such as bathroom, swimming pool, and kitchen.
- Protecting polyurethane foam insulation.
- Waterproofing of flowerbeds and planting pots.
- Waterproofing of water reservoir and distribution channels.
- Waterproofing and protection of concrete structures such as bridges and tunnels.
- Waterproofing of metal surfaces.
- Park garage ceiling Waterproofing and siding.
features of product
- it is UV light resistant.
- ünce it is applied, it creates a one piece membrane that does not allow any joints or possibilities of leakage.
- it can be in continuous contact with water since it is pure polyurethane.
- it keeps its mechanical properties in temperatures between -30° C and +90° C.
- it covers up to 2 mm cracks even in -10° C.
- it completely adheres to the surface without any additional adhesion process.
- it is possible to walk on the surface with Waterproofing application.
Make sure the surface is clean, dry and solid and any dirt that could affect the adherence of the membrane is removed. Maximum moisture content should not be above 5%. The new concrete structure should dry out for at least 28 days. The old sidings, dirt, oils, organic materials and dust should be cleaned with mechanical grinding. it is important to remove possible imperfections on the surface. Any kind of loose surface part and the dust of the grinding process should be removed carefully.
The application surface should be primed with eile PUR 71 O.
Karışım Oranı:
Mix well before using, pour on the primed surface and spread with a roller or brush until the whole surface is covered. After 12 hours (within 36 hours maximum) another layer of eile PUR 012 should be applied. lf needed, a third layer of eile PUR 012 may be applied too. it should be applied in average of 1,4-2,0 kg/m2 in two or three layers. This amount of application should be done with a roller and airless spray, under proper conditions on a flat surface. eile PUR 012 should not be used more than 0,7 mm (dry layerl of thickness per each layer.
- in average 1,4-2,0 kg/m2 for 2-3 layers.
Tin bucket of 25 kg.
The material should be kept away from humidity and sunlight. Storage temperature should be between 5° C and 30° C.
