POMEX WATERBOND
areas of usage
- Outdoor and indoor places, vertical or horizontal applications.
- Filling and plugging water leakage before insulation.
- To stop the pressurized or leaking water in a short time in foundations, supporting walls, elevator shafts, water tanks and concrete pipes.
features of product
- It sets rapidly without shrinking.
- Its structure does not conta in chloride.
- It is one-component, just add water.
- It creates waterproof plug by expanding.
- It has high resistance and stability.
The application surface should be solid, bearing, dust-free and clean. Any oil, rust, paint, paraffin and curing residue should be removed, as they may weaken the adherence. Remove any loose parts on the surface. The cracks and holes on the surface should be cut vertically in 20mm width and depth.
The product sets really fast, so prepare it in small amounts. Put eile WATER BONO in a clean mixing bucket in the amount to be consumed in 60 seconds. Add adequate water. Use a proper glove to mix the component with your hands.
Karışım Oranı: For 5 kg: 1,25 liter-1, 75 liter water (water ratio may vary in accordance with the weather conditionsl. For 1 kg eile WATERBOND product, add 0,25liter -0,35 liter water.
The crack with the active water leakage is opened until you reach the solid ground. At least 2 cm depth and width are required. Mix eile WATER BONO with adequate water, form a cone and apply it on the area with leakage in just one move when it starts getting warm. Apply pressure for 60 seconds. For closing wider holes, the process above is applied a few times from the surrounding of the hole towards the center.
- Do not add any foreign material.
- For application during high water pressure, put a hose to the leakage hole and apply by decreasing the pressure.
- Proper application temperature is between +5 °C +25 °C. The application and setting times of cement based systems are affected by temperature and humidity.
- Do not use it on bricks, gas concretes and poorly plastered surfaces.
- Do not use it on moveable surfaces.
- During cold weathers, use warm or hot water.
5 kg plastic bucket.
it should be stored in cool and dry placed in its original unopened package with a maximum 10-fold stacking.
