POMEX 2K ELASTIC
areas of usage
- Insulation under ceramics in wet areas
- On terraces (with the condition of being covered)
- In swimming pools and water tanks
- It is applied in interior and exterior spaces, in horizontal and vertical applications, from the direction where the water comes.
features of product
Care should be taken to ensure that the application surface is solid, load-bearing and clean. Oil, press, rust, paint, paraffin and cure residue that will weaken adherence should be cleaned. Sections with water leakage should be filled with WATERBOND. Corners and edges should be chamfered with eile TH 70 product. Before application, the surface should be watered. Before starting the application, care should be taken to ensure that there is no free water left on the ground.
10 kg of component B (liquid) is put into the clean mixture bucket and 20 kg of component A (powder) is added little by little. It is mixed with a low speed mixer for 4-5 minutes until a homogeneous appearance is achieved. The mixture is left to rest for 3-5 minutes, then mixed again for 30 seconds. It is ready for application.
Karışım Oranı: A component / B component: 2/1
It is applied with a brush. Application should be done in 2 or 3 layers. The brush application direction of each layer should be perpendicular to the previous application.
- It is not applied to surfaces that are frozen, melting or in danger of freezing.
- The applied surface should be protected against frost and excessive wind for 3 days.
- Foreign materials should never be added.
- Surfaces that have not completed their cure should not be exposed to water.
- The application ground and ambient temperature should be between +5 °C and +30 °C.
- 3 days should be waited to cover terrace applications.
- The mixture should be consumed within 90 minutes.
- It is not applied to wood, OSB, PVC, bitumen surfaces, painted and metal surfaces.
Component A: 20 kg kraft bag -- Component B: 10 kg plastic drum
It should be stored in its unopened original packaging at temperatures between +5°C - +35°C. The product should be protected from direct sunlight and frost.
