POMEX 2K

POMEX 2K
Two Component Semi-Elastic Waterproofing Mortar
It is a two-component, semi-elastic waterproofing mortar based on cement and liquid polymer.

areas of usage

  • From the direction the water comes from in vertical and horizontal applications in indoor and outdoor spaces,
  • On terraces and balconies (provided that they are covered)
  • Basement walls, concrete pipes.
  • In water tanks
  • Under screed and ceramics
  • As a waterproofing material under ceramics in wet areas

features of product

  • It creates a semi-flexible impermeable surface, its adherence is excellent.
  • Can be applied horizontally and vertically.
  • It increases the durability of the applied structure against external factors.
  • Can be applied with a brush.
  • Applied to damp surfaces.
  • It is permeable to water vapor.
POMEX 2K uygulama

The surface to be applied must be cleaned of dust, oil and loose parts that will reduce adherence. Defects on the surface must be repaired with eile TH 60 or eile TH 70. Edges and corners must be chamfered with eile TH 70. Before application, the surface must be wetted with clean water and wait until there is no water layer on the surface.

5 kg of component B (liquid) is poured into a clean application bucket. 20 kg of component A (powder) is added slowly. It is mixed with a low-speed mixer until it reaches a homogeneous and lump-free consistency. It is left to rest for 5 minutes; then for 30 seconds. It is mixed again and made ready for application.

Karışım Oranı: Component A / Component B: 4/1 (by weight)

Application should be done in 2-3 layers with a brush. The application of each layer should be perpendicular to the previous one. At least 6 hours should be waited between the applications.

  • Not applicable against negative water pressure.
  • You should wait at least 3 days before applying ceramic on it.
  • You must wait at least 7 days to fill the water tanks with water.
  • The concrete floor on which the application will be made must be at least 28 days old.
  • It should be covered in applications exposed to direct sunlight.
  • It is not applied to wood, OSB, PVC, bitumen surfaces, painted and metal surfaces.

20 kg kraft bag - 5 kg plastic drum

It should be stored in its unopened original packaging at a temperature between 5 °C - 30 °C. The product should be protected from direct sunlight and frost.

Chat on WhatsApp