eile MAX SEAL ELASTIC
areas of usage
- in indoor and outdoor places, in vertical and horizontal applications.
- in terraces and balconies.
- Beneath ceramics in wet areas such as bathroom, kitchen and toilet.
features of product
- it is easy to prepare and apply.
- it is applied with brush and trowel.
- it has crack bridging properties with its highly flexible structure.
- it creates a humidity and water resistant layer without grout and attachment.
- Coating materials such as ceramics can be applied over this product.
- it is white and UV light resistant.
- it can be used on the areas affected by motion and vibration.
- Thanks to its high adhesion pertormance and flexibility, it creates a perfect water resistant layer underneath screed and ceramics without being affected by detormation.
The application surface should be cleaned from any dust, oil and loose pieces that may weaken the adherence. Any damages on the surface should be fixed with eile TH 60 or eile TH 70. The corners and the edges should be chamfered with the product eile TH 70. The surface should be wet with clean water betore the application and wait until there is no any layers of water.
Pour the 8kg component B lliquid) in a clean mixing bucket, and then add 25kg of component A lpowder] slowly. Mix with a low speed mixer until you get a homogenous and lump-free mixture. Let the mixture resettle tor 5 minutes and mix it again tor 30 seconds. it is now ready tor application.
Karışım Oranı: 8 kg (Component B) 25 kg (Component A)
Apply the mixture with a brush in 2 or 3 layers. in each layer, the direction of application should be perpendicular to the direction of the previous application. Wait at least 6 hours tor application between the layers.
- it can not be applied on negative water pressure.
- The applications exposed to direct sunlight should be covered.
- Wait at least 3 days betore covering it with ceramic application.
- Do not apply on metal or wooden surfaces.
- Complete drying time is at most 48 hours.
- Wait at least 7 days tor waterproofing.
- The concrete ground should be at least 28 days old betore the application.
- The mixture should be consumed in 90 minutes.
25 kg kraft sack - 8 kg plastic drum
it should be stored in its original unopened package and between + 5°C - +30°C temperatures. The product should be protected from direct sunlight.
