eile MAX SEAL
areas of usage
- in indoor and outdoor places, on the direction it is exposed to water in vertical and horizontal applications
- in terraces and balconies [provided that it will be coveredl
- Basement walls, concrete pi pes,
- Water reservoirs.
- Under screed and ceramics,
- For insulation of beneath ceramics in wet areas such as bathroom, toilet.
features of product
- it is certificated far use in drinking water reservoirs.
- it creates a semi flexible, impermeable surface with perfect adherence.
- it can be applied horizontally and vertically.
- it increases the resistance of the structure on which it is applied against the external factors.
- it can be applied with a brush.
- it is applied on damp surfaces.
- it is water vapor permeable.
The application surface should be cleaned from any dust, oil and loose pieces that may weaken the adherence. Any damages on the surface should be fixed with eile TH 60 or eile TH 70. The corners and the edges should be chamfered with the product eile TH 70. The surface should be wet with clean water befare the application and wait until there is no any layers of water.
Pour the 5kg component B [liquidl in a clean mixing bucket, and then add 20kg of component A [powderl slowly. Mix with a low speed mixer until you get a homogenous and lump-free mixture. Let the mixture resettle far 5 minutes and mix it again far 30 seconds. it is now ready far application.
Karışım Oranı: 5 kg (Component B) - 20 kg (Component A)
Apply the mixture with a brush in 2 or 3 layers. in each layer, the direction of application should be perpendicular to the direction of the previous application. Wait at least 6 hours far application between the layers.
- it can not be applied on negative water pressure.
- Wait at least 3 days befare covering it with ceramic application.
- Do not apply on metal or wooden surfaces.
- Complete drying time is at least 48 hours.
- Wait at least 7 days befare filling the water reservoirs with water.
- The concrete ground should be at least 28 days old befare the application.
- The applications exposed to direct sunlight should be covered.
20 kg kraft sack - 5 kg plastic drum
it should be stored in its original unopened package and between + 5 °C- + 30 0C temperatures. The product should be protected from direct sunlight and frost.
