eile KAPILER 2K
areas of usage
- In vertical and horizontal applications in interior and exterior spaces of buildings,
- In water tanks,
- Foundation, curtain and basement walls
- In swimming pools
- It is applied to surfaces such as concrete, screed, etc. in wet areas such as bathrooms and toilets.
features of product
- Resistant to both negative and positive water pressure.
- It is easy and comfortable to apply.
- It has high adhesion strength.
Care should be taken to ensure that the application surface is solid, bearing and clean. Oil, press, rust, paint, paraffin and cure residue that will weaken adherence should be cleaned. Sections with water leakage should be filled with WATERBOND. Corners and edges should be chamfered with eile TH 70 product. Before application, the surface It should be saturated with water. Before starting the application, care should be taken to ensure that there is no free water left on the ground.
3 kg of component B (liquid) is put into the clean mixture bucket and 5-6 L of water is added to it. 25 kg of component A (powder) is added little by little to component B and the mixture water in a clean bucket and mixed 3-4. It is mixed with a low speed mixer for 4 minutes until a homogeneous appearance is achieved. The mixture is left to rest for 3-5 minutes and then mixed again for 30 seconds.
Karışım Oranı: Component A: 25 kg - Component B: 3 kg
The prepared mixture is applied to the entire surface with a brush. The application should be done in at least 2 layers. The application of each layer should be done at right angles to the previous application. 6-12 hours should be waited between layers.
- It is not applied to surfaces that are frozen, melting or in danger of freezing.
- The applied surface should be protected against frost and excessive wind for 3 days and the surface should be kept moist.
- Foreign materials should never be added.
- Surfaces that have not completed their cure should not be exposed to water.
- The application floor and ambient temperature should be between +5 °C and +25 °C.
- The tank should be filled with water at least 7 days after the application in water tanks.
Component A: 20 kg kraft bag -- Component B: 3 kg plastic drum
It should be stored in its unopened original packaging, in a cool and dry environment, above +5 ° C. Component B (liquid) should be protected from freezing.
