eile A SEAL
areas of usage
- Under ceramic tiles in wet areas such as bathrooms, kitchens, balconies, and toilets
- On terraces (with the precondition of covering)
- In swimming pools
- In water tanks
- Both indoors and outdoors, applied in horizontal and vertical directions from where water comes
features of product
The application surface must be durable, dust-free, load-bearing, and clean. Any substances like oil, grease, rust, paint, paraffin, and curing residue that could weaken adhesion should be removed. Areas with water leakage should be filled with WATERBOND. Corners and edges should be filled with TH 70 product. The surface should be saturated with water before application. Ensure there is no free water remaining on the surface before starting the application. If the surface is not adequately wetted, rapid drying may occur during application.
10 kg of component B (liquid) is poured into a clean mixing bucket, then 20 kg of component A (powder) is slowly added. It is mixed with a low-speed mixer until a homogeneous appearance is achieved, typically for 4-5 minutes. The mixture is allowed to rest for 3-5 minutes, then mixed again for 30 seconds. It is now ready for application.
Karışım Oranı: Mixture Ratio Component A: 20 kg Component B: 1O kg
It is applied with a brush. The application should be done in 2 or 3 coats. The brush application direction in each layer should be perpendicular to the previous application.
- It should not be applied to frozen, thawing, or surfaces at risk of freezing.
- The applied surface should be protected from freezing and excessive wind for 3 days.
- No foreign material should be added to the mixture.
- Surfaces that have not completed curing should not be exposed to water.
- The ambient temperature for application should be between +5°C and +30°C.
- For terrace applications, a wait of 3 days is required before covering.
- The mixture should be used within 90 minutes.
- Water tanks should be filled with water at least 7 days after the application in water tanks
Component A: 20 kg kraft sack, Component B: 1O kg plastic drum
It should be stored in cool and dry placed in its original unopened package and above + 5 °C. The component B (liquid) should be protected from frost.
