eile BİTÜ-ÇİM FLEXIBLE
areas of usage
- Foundation and face walls of all structures.
- For leachate insulation in floors like bathroom, kitchen and toilet.
- Balcony and terrace.
- Protecting the concrete against water and microorganisms incoming from the ground.
- Underneath the cement based screed.
- Ceilings of underground parking garage.
- in garden terraces against ground humidity.
- in parterre insulation far attaching low temperature insulation panels.
- Retaining walls and settling tanks.
features of product
- it is easy to prepare and apply.
- it has the bridging feature far shrinkage cracks.
- it can be applied on dry and slightly damp surfaces.
- it has long operating time.
- it is solvent-free, so eco-friendly.
- it can be applied on vertical and horizontal surfaces.
- it is resistant to dilute acid, alkaline,chloride and sulfate ions.
- it is not affected by microorganisms and aggressive underground water.
The application surface should be solid, bearing, dust-free and clean. Any oil, grease, rust, paint, paraffin and curing compound residue which reduce adherence should be removed. The places with active water leakage should be filled with Waterbond. The corners and the edges should be chamfered with the product eile TH 70 . The application surface should be primed.
Mix eile BİTÜ-ÇİM ELASTİK component B [liquidl in its own bucket. Add component A [powderl to the component B bucket bit by bit. Mix with a low speed mixer far 3-5 minutes until you get a homogenous mixture. Let the mixture wait far 5 minutes and mix it again far 30 seconds. it is now ready tor application.
Karışım Oranı: Component A: 8 kg; Component B: 22 kg
Preparing the primer: After mixing Components A and B, take 1 kg of mixture apart and mix it with about 3kg of water. Mix with a low speed mixer far 3-4 minutes until you get a homogenous mixture. This material will be used as the primer layer. Apply the primer homogenously on the surface with a brush. ünce the primer layer is dry, apply the eile Bitu-Çim Elastic components A and B with a brush and in two layers. Wait until the first layer is dry enough before you continue with the second layer, so the first layer will not be damaged. lf the area is exposed to temporary and continuous water pressure, after the application of the first layer of eile Bitu-çim Elastic, the surface should be fully covered with alkali resistant fiber reinforcement mesh and the application of the second layer of eile Bitu-çim Elastic should fully cover the mesh.
- Do not apply to surfaces which are frozen, melting or under the risk of frost.
- The applied surface should be protected against rain, frost and extreme wind far 3 days.
- The surface and the ambient temperature should be between +5 °C and +30 °C during the application. lf the temperature conditions do not match the given values, wait tor the proper temperature values tor the application.
- Do not add any foreign substance in any way.
- The surfaces with incomplete curing should not be exposed to water.
- The coating should be applied to the surfaces of the structure or the structure elements that are exposed to water.
- it is not UV resistant. So, after the drying period, cover it with a proper material.
- The mixture should be consumed in 90 minutes.
in a 30 kg bucket: Component A: 8 kg [powder] - Component B: 22 kg [liquid]
it should be stored in its original unopened package between + 5 °C -+30 °C temperature. Protect the product from direct sunlight.
