eile PUR 2K B
areas of usage
- Roof, terrace areas, parking lots
- Before ceramic application in swimming and ornamental pools
- In aircraft hangars and tunnels.
- On asphalt and EPDM membranes
- Plant beds and green roof systems
- Insulation of roofs made of metal or fiber cement
- Domestic water tanks
- Insulation of foundation and curtain concrete of constructions
- Used in irrigation channels.
features of product
- No thinning required.
- It provides excellent mechanical properties, high tensile, stretching, tear and abrasion resistance.
- It is effective in water vapor transmission. The film breathes and thus prevents moisture from accumulating under the floor.
- It has high crack bridging properties.
- It has excellent coverage and adheres to the surface very well.
The surface to be applied must be dry and clean. Concrete and mold residues must be cleaned mechanically, and oil, grease, fuel and paraffin waste must be cleaned using chemical solvents. Damaged coatings and unstable surfaces must be repaired with eile TH60 or eile TH 70 repair products. The upper surface adhesion of the subfloor The average should be 1.5 N/mm². The concrete moisture content of the subfloor should not exceed 4%. If necessary, the subfloor should be cleaned from dust with appropriate measures, such as grinding machines or diamond-tipped machines. The surface should be cleaned with a suitable primer. After priming, the floor is ready for application.
eile PUR 2KB component is completely poured into component A and mixed with a mixer at 300 rpm. The material should be used immediately after mixing.
Karışım Oranı: Component A / Component B: 1/1 by weight
The pot life of the product is 20-25 minutes at 20 °C. The prepared mixture is applied to the previously prepared surface with a roller, brush or spatula. Care should be taken to ensure that the ground temperature is above 10 °C during application. Protection of the applied surfaces (direct contact with water) ) must be observed for at least 24 hours. Minimum pointsToTakeIntoConsideration is between 1.0 and 1.6 kg/m² depending on the application ground.
- Application should be avoided below 10°C and in very humid environments.
- Mixing ratios should be taken into consideration.
- A minimum of 12 hours should be waited between coats (at 20°C)
- Application should be at least 2 coats.
- In applications to be carried out in extremely cold weather, ambient and ground temperature should be provided with the help of heaters.
- Application should be done by expert practitioners.
- In order for the entire material to complete its cure, the ambient and ground temperature must be within the appropriate range.
Component A: 20 kg pail -- Component B: 20 kg pail -- Total: 40 kg
It should be stored in its unopened original packaging, in a cool and dry environment at a temperature between +5 °C - +25 °C, away from direct sunlight and without stacking pallets.
