eile PUR 1KB
areas of usage
- On the basics
- On roofs, verandas and balconies (provided that they are covered)
- On wet surfaces
- It is used horizontally and vertically in building units where the insulation material must have high crack bridging properties.
features of product
- It cures with moisture in the air.
- Provides high tensile, tear and abrasion resistance.
- It shows excellent mechanical and chemical properties.
- It adheres perfectly to different surfaces, creating a highly elastic and durable film.
- It is effective in water vapor transmission.
- The film breathes and prevents moisture from accumulating on the bottom layer.
- With its elastic structure, it has the feature of bridging shrinkage cracks.
The surface to be applied must be dry and clean. Concrete and mold residues must be cleaned mechanically, and oil, grease, fuel and paraffin waste must be cleaned using chemical solvents. Damaged coatings, unstable surfaces and cracks must be repaired with suitable products. The concrete surfaces to be applied must meet at least the following standards. must have: -Hardness: R28= 15 Mpa -Humidity: W <10% -Temperature: 5-35 °C -Relative Humidity: <85%
Karışım Oranı:
Priming: After the repair, depending on the surface condition, priming should be done with a suitable epoxy or polyurethane-based primer and then eile PUR 1KB application should be started. Spraying: It is applied in 2 layers with a spraying method or brush or roller, with a total pointsToTakeIntoConsideration of 2kg/m². Application by spraying method. If it is planned to be done, the material should be thinned with Polyurethane Thinner and then the application should be started.
20 kg plastic bucket
It should be stored in its original unopened buckets, in dry environments between 5°C and 25°C. Material in opened buckets should be used immediately.
