POMEX THIN PLASTER
areas of usage
- It is applied as thin plaster on thick plaster on interior and exterior surfaces. Before applying to absorbent floors such as aerated concrete, the surface should be primed with eile ASTAR E. Depending on the ambient temperature, 1-2 days should be waited. Gross concrete thin plaster should be preferred for gross concrete surface applications.
features of product
- It creates a solid base with its high adhesion and durability.
- It is easy to apply and economical.
- Since it is fiber reinforced, it is resistant to external effects.
- In machine applications, machine thin plaster should be preferred.
The application surface must be solid, flat and clean. The surface must be cleared of substances that reduce adherence. Before application, the surface must be moistened and saturated with water on hot and windy days.
The appropriate amount of water is poured into the clean mixing bowl using a scale. POMEX THIN PLASTER is added slowly. Mix with a low speed mixer for 3 - 5 minutes until a homogeneous mixture is obtained. It is left to rest for about 5 minutes, and after mixing again for 20-30 seconds, the material becomes ready for use.
Karışım Oranı: 5-6 liters of water for 25 kg of powder -- For 1 kg of powder: 0.200-0.240 lt of water -- Mixture density: 1.5-1.6 gr/cm3
The mixture is ready for use; It is applied with a trowel to a previously saturated or primed surface with a thickness not exceeding 4 mm. If desired, after the applied mortar has absorbed its water, sprinkle water on the mortar surface with a plasterer's brush and finish the surface smoothly with a steel trowel.
- In POMEX THIN PLASTER application, appropriate temperatures should be waited if the ambient temperature is below +5°C or above +30°C. Application should not be made in extremely hot, rainy or windy weather.
- POMEX THIN PLASTER application thickness should not exceed 4 mm.
- Water and new materials should never be added to the crusted POMEX THIN PLASTER mixture.
- The prepared mixture should be consumed within 45 minutes at 20 °C.
- The surface on which POMEX THIN PLASTER is applied should be protected from sun and wind for 24 hours.
25 kg craft bag
It should be stored in its unopened original packaging, in a cool and dry environment, with a maximum of 10 layers stacked.
