eile TU-05
areas of usage
- It is a primer material used to increase the adherence of the topcoat material in interior and exterior spaces, especially on surfaces with high porosity and absorbency.
- Before the application of cement, gypsum-based and thermal insulation plaster on exposed concrete surfaces, walls and ceilings,
- It is applied to old building plaster surfaces to increase adherence before the new thermal insulation plaster will be applied.
features of product
- It is a single component.
- It does not contain solvents.
- It can be applied with a brush or a fleece roller.
Surfaces must be clean and solid, they must be free from residues of substances such as oil, grease, paint, rust and paraffin that will reduce adherence, and loose parts must be cleaned by air or mechanical methods.
eile TU 05 is mixed with a low speed mixer for 5 minutes until a uniform mixture is obtained. The material is ready for use. eile TU 05 is mixed with a low speed mixer for 5 minutes until a uniform mixture is obtained. The material is ready for use.
Karışım Oranı:
The homogeneous mixture of prepared eile TU 05 fleece should be applied to the surface in a single layer with a roller or a suitable brush.
- The application surface must be clean and solid.
- Application should be done between +5 °C and +30 °C.
- For applications on eile TU-05, approximately 24 hours should be waited at 20 °C.
12 kg plastic bucket
It should be stored in its unopened original packaging in a cool and dry environment, protected from direct sunlight and frost.
