eile ROTFIX
areas of usage
- Woodwork and louver mounting
- Lamp, satellite dish and pipe mounting
- Water closet and bathroom armatures,
- Advertising signs and road signs, doors, guardrails, hand rails, tent and grate mounting
features of product
- Its a rapid curing
- It can be used with standard guns.
- It can be used at low temperatures.
- Its load carrying capacity is high.
- Its consumption is low.
The application surface must be clean. Oil and dirt should be cleaned and all loose materails which may reduce adherence should be removed. Drill anchorage hole with a driller. Clean hole with a wire brush. Clean hole with compressed air. The application surface should have sufficent resistance. The concrete should have 25N/mm2 pressure resistanec minimum and 1.5-2 N/mm2 tensile strength. The moisture rate of the surface should not exceed 5%.
Attach a mixer nozzle to the tip of the cartridge. Press it with its special gun until it gets a homogeneous color. Do not use the first product coming out of the mixer. Fill it by starting from the bottom. Fill half of it. Insert junction piece into the hole by rotating it. Remove overflow material before it gets hardened. Do not touch the junctio piece before it gets hardened fully. It should avoid applying in very humid ambient and under 10 °C temperatures. Pay attention to mixture rates.
- This product is for professional use.
- Read carefully security warnings on the package before use, see Material Security lnformation Document if necessary.
- Do not inhale, avoid contacting with skin and eyes, do not swallow, use appropriate work safety materials.
- Take precautions for environment not to be polluted and fire danger.
- Apply it in well ventilated environments.
Package 345 ml standard cartridge, 24 cartridges in 1 box.
it should be stored in unopened original package in a cool and dry place and over +5°C and under +35°C. The product should be protected from direct sunlight.
