eile EPOX
areas of usage
- Woodwork, louver, lamp, pipe, satellite dish mounting,
- Water closet, bathroom armatures,
- Reinforcement anchorage, ironstone planting
- Advertising sign, road signs, doors, guardrails, hand rails, tent mounting.
features of product
- It is rapid curing.
- It can be used with standard guns.
- It can be used at low temperatures.
- Its load carrying capacity is high.
- Its consumption is low
The application surface should have sufficient resistance. The concrete should have 25 N/mm² pressure resistance minimum and 1,5-2 N/mm² tensile strength. The surface should be smooth, clean and dry and moisture rate should not exceed 5%. It should avoid applying in very humid ambient and under 10°C temperatures. Anchor holes should be clean.
Karışım Oranı: By volume A:B 10:1
The application surface should be clean. Oil and dirt and all loose materials which may reduce adherence should be removed. Drill anchorage hole with a driller. Clean the dole with a wire brush. Clean the hole with compressed air. Attach a mixer nozzle to the tip of the cartridge. Press it with its special gun until it gets a homogeneous colour. Do not use the first product coming out of the mixer. Fill it by starting from the bottom. Fill halt of it. lnsert junction piece into the hole by rotating it. Remove overflow material before it gets hardened. Do not touch the junction piece before it gets hardened fully.
- This product is for professional use.
- Read carefully security warnings on the package before use, see Material Security lnformation Document if necessary.
- Do not inhale, avoid contacting with skin and eye, do not swallow, use appropriate work safety materials.
- Take precautions for environment not to be polluted and fire danger.
- Apply it in well ventilated ambient.
Package 345 ml standard cartridge, 24 cartridges in 1 box
it should be stored in unopened original package in a cool and dry place and over + C and under +35° C. The product should be protected from direct sunlight.
