eile LATEX
areas of usage
- In repair mortars; as an adherence enhancer in the repair of damaged surfaces of cement-based screeds, concrete and plasters, in ensuring the water impermeability of all kinds of interior and exterior plasters such as walls and ceilings, between old and new concrete; in screeds, to prevent cracking and to increase adherence and impermeability, It is used as an adherence and strength enhancer in adhesive mortars of coating materials such as ceramics.
features of product
- It provides impermeability and flexibility.
- The resistance of the mortar applied by mixing it with eile Latex against cracking and abrasion increases; bending strength and impact resistance increase.
- It is not corrosive.
- The resistance of structures to external factors and chemicals increases.
- It provides high adherence.
Care should be taken to ensure that the surface is solid, load-bearing, dust-free and clean. It should be cleaned of any residue that could weaken adherence. There should be no loose parts on the application surface.
In plaster mortars, 350 kg of cement is mixed dry into 1 m3 of aggregate. A liquid mixture is prepared by adding 1-1.5% of the cement weight of Eile Latex product into approximately 120 liters of water. The liquid mixture is added to the powder mixture until a trowel consistency mortar is obtained. As a primer between old and new concrete and in screed application, the application surface should be cleaned from dust, oil and loose particles. Mix 1 kg of cement with 3 kg of toothed sand (3 mm) and 2 kg of eile Latex until it reaches a boza consistency. The mixture is applied 2 mm to the surface that is previously saturated with water and does not contain free water. New concrete is applied before this primer dries. In screed construction, 1 m3 of suitable aggregate is mixed with at least 350 kg of cement and 1 DO kg of water. The mixture is added to the cement-aggregate mixture until a mortar consistency suitable for the screed is obtained. The mortar mixture is applied to the surface with a primed substrate. In the application of repair mortars: 1 part cement and 3 parts sand are mixed. To this prepared dry mixture; Add the liquid mixture prepared with 1 part latex and 1 part water. Mix until a mala consistency is achieved.
- If the surface and ambient temperature on which eile latex will be applied is below +5 ° C or above +30 ° C, the permitted temperatures for application must be waited.
- Do not apply to surfaces that are frozen, melting or in danger of frost.
30 kg plastic bucket
It should be stored in its unopened original packaging, in a cool and dry environment, in a stack of maximum 10 layers.
