eile EPX 240 G
areas of usage
- In machinery foundation which requires high strength.
- Joint repairs.
- Floor concrete repairs.
- Bridge bearings, airports.
- In ironstone planting due to its fluent consistency.
- Crane rail mountings.
features of product
- It is solvent free.
- High compressive, bending and tensile strength.
- Non-shrinking and rapid hardening.
- High wearing and impact strength.
- Perfect chemical strength.
The application surface should be clean. It should be cleaned from oil and dirt and all loose materials which may reduce adherence should be removed.
B component is added into A component. It’s mixed for 1-2 minutes with a low speed mixer. Then C component is added and mixed until it gets homogenous colour. After this procedure, the material is ready to use.
Karışım Oranı:
The application surface should have sufficient strength. Concrete should have 25 N/ mm² compressive strength and 1,5 N/mm² tensile strength. The surface should be clean, smooth and dry and not exceed 5% moisture. Avoid under 10°C temperatures and very humid ambient. Pay attentions to mixture rates. Wait 12 hours minimum between coats (at 20°C). After 12 hours at 20°C, you can walk on it.
- This product is for professional use.
- Read carefully security warnings on the package before use, see Material Security Information Document if necessary.
- Do not inhale, avoid contacting with skin and eye, do not swallow, use appropriate work safety materials.
- Take precautions for fire and explosion danger and environment not to be polluted.
- Apply it in well ventilated ambient.
A Component: 3,0 kg can, B Component: 1,50 kg can, C Component: 18,00 kg kraft sack, Total: 22,50 kg/set
The product should be stored between 5-35°C. The product should not be exposed direct sunlight. An opened product should be stored in original package by closing its cover.
