eile EPX 100
areas of usage
- Fixing of grout packers.
- Ironstone planting on concrete and stone walls.
- Stub anchorage.
- Adhering of different structure materials.
- Mounting and adhering of metal and steel parts to concrete elements.
- Concrete repair.
- Fixing of guardrails of bridges and viaducts.
- Anchoring of bolts and pins.
- Elastic
features of product
- It is pasty and easy to apply.
- It provides early strength.
- It hardens without shrinking.
- It is appropriate for overhead applications.
- It perfectly adheres to concrete and steel.
- It is resistant to chemicals.
The application surfaces should be cleaned from oil, dirt, loose parts, cement grout on concrete surfaces and parts which may prevent adherence. If necessary, a plaster application should be done.
A and B components should be mixed for 3-4 minutes at least with a low speed mixer by paying attention to mixture rates until it gets a homogenous grey colour. After mixing, the material is ready to use. If mixture is used for rod anchorage and ironstone planting, use a sealant gun. The material can easily be applied with a trowel or scraper.
Karışım Oranı: By weight 3:1
The surfaces should have sufficient resistance. Concrete should have 25 N/mm² compressive strength and 1,5-2 N/mm² tensile strength minimum. The surface should be clean, smooth and dry. The moisture rate of the surface should not exceed 5%. If the rate is over this value, use moisture surface epoxy plaster. When applying on steel surfaces sand blasting SA 2/5 should be done. It should avoid temperatures under +10°C and over + 30°C in humid ambient. During application, floor temperature should be over 3ºC of dew point minimum. Pay attention to mixture rates. Wait 12 hours minimum between coats (at 20°C). After 12 hours at 20°C, you can walk on it.
- This product is for professional use.
- Read carefully security warnings on the package before use.
- See Material Security Information Document if necessary.
- Do not inhale, avoid contacting with skin and eye, do not swallow, use appropriate work safety materials.
- Take precautions for fire and explosion danger and environment not to be polluted.
- Apply it in well ventilated ambient.
A Component: 4,5 kg can, B Component: 1,5 kg can, Total: 6 kg / set
The product should be stored between 5-35°C. The product should not be exposed direct sunlight. An opened product should be stored in original package by closing its cover.
