eile KA 300
eile KA 300 is a mold release agent formulated with mineral oils, resistant to curing temperatures, used for easy dismantling of wooden, steel and playwood molds after concrete casting and to obtain concrete with a smooth surface.
areas of usage
- It is used in wood, plywood and steel formwork systems.
features of product
- It ensures clean and smooth concrete.
- It ensures easy and fast separation of the mold from the concrete.
- It makes it easier to clean the mold.
- It does not leave any stains on the mould.
- It extends the life of the mould.
- It is resistant to heat and steam cure applications.
Before the material is used, the molds must be thoroughly cleaned of concrete residues, wood and iron pieces.
To obtain the best result, eile KA 300 should be applied homogeneously on the mold in a thin layer, by brush, roller or automatic/manual spraying, without allowing ponding to occur.
- eile KA 300 must be mixed before use.
- For maximum performance; The material should be applied to form a thin film; since excessive use of oil may cause staining on the concrete, excess oil should be removed with a sponge, cloth, etc.
- The material can be applied in two layers depending on the absorbency of the molds.
- Before using the product, try it on a small area of the surface you will use.
30 liter jerry can.
It should be stored in its original package at +5° C / +35° C in dry, protected and ventilated environments, protected from direct sunlight and frost.
