eile FINISHING COAT FIBER PLASTER
areas of usage
- It can be applied indoors and outdoors to get a smooth surface prior to painting and decorative coating on exposed concrete, rough cast and lightly aggregated thermal insulation plaster surfaces.
features of product
- It adheres perfectly and it is easy to apply.
- Its adherence rate is high due to the chemicals inside.
- It does not rebound, thus it is very economical.
- It does not crack.
- It provides a smooth surface.
- It is resistant to the external factors because it is fiber-reinforced.
The application surface should be strong, flat and free from adherence decreasing residues. The applications on the surface of POMEX Thermomex should take place after a 2-3 days waiting period. early drying and shedding risk of eile FINISHING COAT FIBER PLASTER should be eliminated on the surfaces with high absorbency. The surface should be moisturized before the application; and should be saturated with water in very hot and windy weather conditions. The surface of the light thermal insulation plasters should be primed with eile PRIMER E.
A clean mixing bowl is filled with the necessary amount of water by means of a scale. Then, FINISHING COAT FIBER PLASTER is slowly added into the mixing bowl. It is mixed with a low speed mixer for 3 - 5 minutes until obtaining a homogenous mixture. The mixture waits for 5-10 minutes and mixed again for 30 seconds to get it ready for use.
Karışım Oranı: 5.5-6.5 liters of water for 25 kg of powder, 0.220-0.260 liters of water for 1 kg of powder product
The prepared material must be applied on the surface with a trowel at equal thickness. Thickness of the application should not exceed 5 mm. After the applied mortar drains, some water is sprinkled on the surface with a brush. The surface is completed using a steel trowel. Rapid water loss of the plaster should be prevented for 24-48 hours using curing material or water especially in the applications in hot or windy places.
- If the ambient temperature is below +5°C or above +30°C, the suitable conditions should be met. Extremely hot, rainy or windy weather is not suitable for application.
- The material should not be applied thicker than 5 mm.
- The drying material in the bowl should not be mixed with water and new material.
- It should not be applied on the surfaces which are frozen, melting or under the risk of frost within 24 hours.
- The prepared mixture should be used at 20°C within 60 minutes.
Kraft sacks of 25 kg
Best stored in cool and dry place in unopened package with a maximum 10-fold stacking.
