eile PLS 2000

eile PLS 2000
Plaster Mortar for Thermal Insulation Boards
Render used for plastering cement-based, polymer, and fiber-reinforced thermal insulation boards.

areas of usage

  • It is used for plastering the surfaces of extruded and expanded polystyrene, rock wool, glass wool, and similar panels used for exterior thermal insulation in buildings.

features of product

  • Provides excellent adhesion.
  • Easy to prepare and apply.
  • Has a long processing time.
  • Can be directly painted over.
  • Prevents condensation with high water vapor permeability, allowing the system to breathe.
  • Does not crack due to fiber additives.

The surfaces of the panels to be applied must be securely adhered, dry, and clean.

The appropriate amount of water is poured into a clean mixing container using a measuring cup. eile PLS 2000 is slowly added. It is mixed with a low-speed mixer for 3 - 5 minutes until a homogeneous mixture is obtained. After resting for 5-10 minutes, the material is ready for use after being mixed again for 20-30 seconds.

Karışım Oranı: For 25 kg of powder: 5.5-6.5 liters of water, For 1 kg of powder: 0.220-0.260 liters of water

Thermal insulation panels are adhered using POMEX Thermal Insulation Board Adhesive or eile PLY 2100. A layer of plaster mortar is then applied over the panels. Next, a mesh is embedded into the first layer of plaster. Afterward, a second layer of plaster is applied. If a smooth surface is desired, it can be smoothed with a wet sponge. eile PLS 2000 has cured, any desired coating material can be applied in the preferred color and appearance.

  • During the application of eile PLS 2000, suitable temperatures should be maintained, ideally between +5°C and +30°C.
  • Avoid application in extreme heat, rainy, or windy conditions.
  • The application thickness should be between 3mm and 4mm.
  • Do not add water or new material to the mixture that has developed a crust inside the container.
  • Avoid application on surfaces that are frozen, thawing, or at risk of freezing within 24 hours.
  • The prepared mixture should be used within 120 minutes at 20°C.

Kraft sack of 25 kg

Unopened original packaging should be stored in a cool, dry place and stacked no more than 10 bags high.

Chat on WhatsApp