eile EPX 225
areas of usage
- On concrete, cement mortars, epoxy based mortars,
- As a primer layer before the application of epoxy polyurethane top coatings
- Factory and warehouse floors, work areas, loading areas,
- In industrial floors subject to medium and heavy loads,
- It is used in the application of abrasion and slip resistance epoxy mortar, which can be obtained in thickness between 5-8 mm.
features of product
- It has high resistance to mechanical load.
- It is resistant to chemicals.
The surface must be clean, supporting, solid and free of loose parts. The moisture content should not exceed 5%. Concrete must be resistant to a minimum of 25 N/mm² pressure and have a tensile strength of at least 1.5 N/mm².
Components A and B are mixed with a low speed mixer for 3 minutes until they become homogeneous. The homogeneous mixture is spread on the surface with a suitable notched trowel. The material is applied in a way that closes the pores; If necessary, application can be made with an airless gun.
Karışım Oranı: 2/1 by weight
Surfaces must have sufficient strength. Floor concrete; It must have a tensile strength of at least 1.5-2 N/mm with a pressure of at least 25 N/mm. The moisture content of the floor concrete should not exceed 5%. Application should be avoided below 10°C and in very humid environments. Mixing ratios should be taken into consideration. A minimum of 12 hours should be waited between coats. It can be walked on after approximately 12 hours at 20°C.
- Application should not be done in extremely hot, windy and rainy weather; if the ambient temperature is above +10 °C and +30 °C.
- In applications to be carried out in extremely cold weather, ambient and ground temperature should be provided with the help of heaters.
- Application should be done by expert practitioners.
- In order for the entire material to cure, the ambient and ground temperature must be within the appropriate range.
- After coating, the surface should be protected from water contact for 24 hours.
- Application should not be done by hand.
Set: 18 kg -- Component A: 12 kg tin -- Component B: 6 kg tin
It should be stored in its unopened original packaging in a cool and dry environment at temperatures above +5°C - +35°C, away from direct sunlight.
