eile EPX 021
areas of usage
- Fabrika ve depo zeminleri, çalışma alanları, yükleme bölgeleri, orta ve ağır yüke maruz endüstriyel zeminler, epoksi, poliüretan ve poliürea uygulama öncesinde nemli yüzey beton astarı olarak kullanılır.
features of product
- Easily adheres to wet concrete surfaces.
- It is elastic and provides high water resistance.
- Resistant to salt water. Waterproof.
- It creates a moisture barrier. It does not contain solvents.
Surfaces must be clean and solid, free of residues such as oil, grease, paint, rust and paraffin that will reduce adherence, and loose parts must be cleaned by air or mechanical methods.
Component B should be slowly added into component A and mixed with a low-speed mixer for approximately 3-4 minutes until a homogeneous mixture is obtained. After the first mixing, the mixture must be placed in a clean container and mixed again. After this process, the material is ready for use.
Karışım Oranı:
The homogeneous mixture should be thoroughly absorbed into the surface with eile EPX 021 roller or a suitable brush and applied in a way that closes the pores. If desired, application can be made with an airless gun. New concrete must be at least 4 weeks old.
- The product is for professional use.
- Pay attention to the safety warnings on the packaging before use.
- If necessary, see the Material Safety Data Sheet of the product.
- Do not inhale, avoid contact with skin and eyes, do not swallow.
- Use appropriate work safety equipment.
Set: 17,5 kg,component A: in 13 kg tin pails, component B: in 4,5 kg tin pails
It should be stored in its unopened original packaging in a cool and dry environment at temperatures above +5°C - +35°C, away from direct sunlight.
