eile EPX 730
areas of usage
- Hospital rooms, waiting rooms,
- Food facilities, dining halls, kitchens,
- Cold storages
- Steel construction
- Used in petrochemical plants.
features of product
The surfaces to be applied must be clean and must be cleaned of oil, dirt, loose parts, cement slurry on concrete surfaces and parts that prevent adhesion. After the surface cleaning process, one of the eile EPX 110, eile EPS 201 primers should be applied.
Components A and B should be mixed for at least 3-4 minutes with the help of a low speed mixer until a homogeneous mixture is obtained, paying attention to the mixing ratios. It is ready for application after mixing.
Karışım Oranı: 4/1 by weight
The prepared homogeneous mixture is applied with a brush, roller or spray gun. Application should be avoided below 10°C and in very humid environments. Mixing ratios should be taken into consideration. A minimum of 12 hours should be waited between coats (at 20°C). Approximately 12 hours later at 20°C. walkable.
- Application should be avoided below 10°C and in very humid environments.
- Mixing ratios should be taken into consideration.
- In applications to be carried out in extremely cold weather, ambient and ground temperature should be provided with the help of heaters.
- Application should be done by expert practitioners.
Set: 25 kg, Component A 20 kg pail, Component B 5 kg pail
It should be stored in its unopened original packaging in a cool and dry environment at temperatures above +5°C - +35°C, away from direct sunlight.
