eile ASTAR E
It is an acrylic-based primer material for surfaces with high porosity such as aerated concrete, gypsum plaster, cement-lime mixed plaster.
areas of usage
- Indoor and outdoor; vertical and horizontal floor applications.
- For priming materials such as lime plaster, gypsum-plaster, aerated concrete, brick, gypsum cardboard plaque.
- To prevent the adhesive product from losing water quickly before ceramic coatings.
- Self-leveling extends the working time of screed and similar materials and eliminates air bubbles.
- To prevent under-carpet screeds from dusting.
- Before wallpaper and paint applications.
- To be applied on cement-based surfaces with absorbent surfaces, to prevent cracks in coating materials.
features of product
- It prevents dust from forming on the surface.
- It does not contain solvents.
- It can be used safely in closed areas.
- It is easy to apply.
- It provides resistance against moisture.
- It provides strong adherence.
Make sure that the surface on which eile ASTAR E will be applied is solid, carrier, dust-free and clean. It must be cleaned of all kinds of oil, grease, rust and paraffin residues that will weaken the surface adherence. There should be no loose parts on the surface.
Possible collapses should be prevented by mixing the material before application. The material is applied with a brush or roller, ensuring homogeneous distribution on the surface. If necessary, it should be applied in two layers on very absorbent floors such as aerated concrete.
- eile ASTAR E application should be done in the temperature range of +5 ° C +30 ° C.
- Application should not be done if the ambient and ground temperature is outside the allowed temperature range.
- After the application, 24 hours should be waited before the coating materials to be applied on it.
In 30 kg plastic drums
It should be stored in its unopened original packaging, in a cool and dry environment at temperatures above + 5 ° C - + 35 ° C, away from direct sunlight.
